It’s Alive! The car comes to life.

Posted by admin October 17th, 2009

After getting ahold of Otmar at Cafe Electric it was determined that the controller hairball (the low voltage controller that all the wired run into) did not have the correct option for running reversing contactors. I sent it back to Cafe Electric and he quickly added the options and got the controler back to me.

With the hairball out, I took the time to rewire a lot of the connections into bundles and run them all into three connectors. This would make removing the hairball easier as well as make it a lot more organized. With the hairball back, it only took me an hour to hook up all the wires from my connectors to the hairball.

I put the system back into the car. I powered it up and turned on the computer. A few moments latter I was checking the setting in the Zilla hairball. Everything confirmed, it was time to turn on the key.

Turning the key I could hear the forward contactor engaging. A further turn of the key to start and the main contactor clicked on as well. The computer was telling me no errors and ready for accelorator input. I slid into the seat and pressed the pedal. With only a slight wine the wheels began to turn. The RPM guage began to climb. It was alive.

Unfortunately it began to rain outside so the car was going to stay in the garage for now. If the weather is good tomorrow it will be time to test it on the street at low speeds.

Andrew McClary
Post From My iPhone

Comments are closed.